Mobile Phone Dangle

Supplies:
* Collection of 4mm crystal beads in any colour you like (I used 2 different pinks) x 27
* Mobile phone strap x 1
* 60mm headpins x 3
* Round nose pliers
* Flat nose pliers
* Wire cutters
* 8mm jump rings x1

Method:
1. Put your beads onto the headpin in any order that you want (I used 2 different pinks - pale pink and hot pink).

2. Use your round nose pliers to make a loop in the end of your headpin. Cut off the extra wire that does not form part of the loop, using your wire cutters.

3. Attach the jump ring to your mobile phone strap and then attach each of the headpins by sliding the loop onto the jump ring. When finish close the jump ring.

Jingle Bells Earrings

Supplies:
* Six small multi colour jingle bells
* Two shepherds hook earrings (gold or silver)
* Four 10mm open jump rings in either gold or silver
* Two 8mm open jump rings in either gold or silver
* Needle nose pliers

Method:
1. Place all 3 jingle bells onto a 10mm jump ring and close the ring with the needle nose pliers.

2. Attach a 10mm jump ring to the shepherds hook earring and close the ring shut.

3. Attach the two 10mm jump rings to the 8mm jump ring and lose the last ring with the pliers.

4. Repeat these steps for your second earring.

Earrings 001

I made these earrings for the very first time. I did them in two lots of different colours. I decided to make my own jewellery for something to do other than my greeting cards as I am trying to be more creative in 2009.

I made them using jingle bells in assortment of colours.

Tear Drop Earrings

Supplies:
Two shepherds hooks (gold or silver)
Two 8mm open jump rings (gold or silver)
Two 10mm open jump rings (gold or silver)
Two tear drop beads (any colour) with hole going through left to right
Needle nose pliers

Method:
1. Place the tear drop beads onto the 10mm jump ring and close using the needle nose pliers.

2. Attach the 8mm jump ring to the shepherds hook and the 10mm jump ring, once attached to the jump ring close using the pliers.

3. Now repeat process for the second pair.

T j Turner Pink Earrings

Supplies:
40mm headpins x 6
8mm jump rings x2
Shepherds hooks x2
8mm beads x 18 in 2 different colours (I used pink x 12 and clear x 6)
Round nose pliers
Flat nose pliers

Method:

1. Take 1 headpin and put 3 beads on it in any colour and order you like. When finish make a loop at the end of the headpin using the round nose pliers. Repeat this with the next 5 headpins.

2. Attach the 3 headpins by the loop to the jump ring and then attached the shepherds hook to the jump ring and close the jump ring up with the flat nose pliers.

3. Repeat step 2 for the other earring.